Takagi TK2 died, no LEDS....

Users who are viewing this thread

Ketzer

New Member
Messages
1
Reaction score
0
Points
0
Location
Tennessee
Ours are 7 years old. Have run flawless, never a hiccup. One of them quit making hot water. On inspection, neither LED is lit (no flashing trouble code). The unit has power, the master trip is working (as in I can trip it out with the button and the red LED comes on, then reset and the light goes out) but the LEDs on the main board are not on. I've checked the two fuses where the power comes in and the fuse on the main curcuit board. They are good. Tankless is very rare in my area, finding a reputable tech is going to be difficult.
Thoughts?

Jeff-
 

Dana

In the trades
Messages
7,889
Reaction score
509
Points
113
Location
01609
Call the Takagi help line- let them talk you through it. It may be a whole control-board failure or something a simple as a loose or corroded connector. It's likely that they still stock the board-level assemblies as a spare part if it comes to that.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks