PHONEMAN
New Member
I have a 1 1/2 hp stss-rite jet pump, 85 foot well, 85 gallon regular pressure tank (non bladder)Pro Source
Chlorine injection w/ 85 gal holding tank, then large carbon filter , then water softener, then another special large
filter to remove Tanin and the smell that goes with it, everything works great, except pressure. Its set at 30/60
It does start pump at 30 and shuts down at 60, so that seems to work.
Question, is there a way to install a booster pump on the 3/4 line running into the house to keep the pressure
at or close to 60psi. I see pressure pumps but not sure how they work.
My chlorineator pump works off a flow control switch, that starts the chlorine pump when it detects water flowing
out to house, could I use a 110v booster pump and just put it in the line to the house, and just plug it into
the flow control switch. As you can see Im kinda lost here
Thanks, Charles
Chlorine injection w/ 85 gal holding tank, then large carbon filter , then water softener, then another special large
filter to remove Tanin and the smell that goes with it, everything works great, except pressure. Its set at 30/60
It does start pump at 30 and shuts down at 60, so that seems to work.
Question, is there a way to install a booster pump on the 3/4 line running into the house to keep the pressure
at or close to 60psi. I see pressure pumps but not sure how they work.
My chlorineator pump works off a flow control switch, that starts the chlorine pump when it detects water flowing
out to house, could I use a 110v booster pump and just put it in the line to the house, and just plug it into
the flow control switch. As you can see Im kinda lost here
Thanks, Charles