How to install CSV and Pressure with my setup?

**SSmith** · 09-01-2012, 06:16 PM

Today we had a brief power outage and now I have no water and the Gundfos CU301 is beeping....

The pump is ok as I moved the wires from the pump to the power and we have lots of water that way.....

Anyways I think it is time for me to switch to the CSV and Pressure switch method.....

I am enclosing a few pictures of my setup now, and would appreciate it if someone could advise me where I need to install the CSV and pressure switch, as well as the exact parts I need to procure....

**Porky** · 09-02-2012, 04:48 AM

It's quite simple but let's hear it from the expert/inventor, Kerry Austin! I'm sure he'll respond on or before Tuesday!

**LLigetfa** · 09-02-2012, 07:02 AM

Not Kerry, Cary, AKA valveman.

**SSmith** · 09-02-2012, 09:45 AM

Originally Posted by LLigetfa

Not Kerry, Cary, AKA valveman.

Thanks guys.....

Is there anywhere in Canada that supplies the valves?

**LLigetfa** · 09-02-2012, 10:10 AM

There is not a comprehensive list of dealers or distributors In Canada. That said, Ingram is in BC.

http://www.wellrehabilitation.ca/ind...le-stop-valves

Valveman might be able to give you some referrals.

**Porky** · 09-03-2012, 06:29 AM

A pside-kick http://www.cyclestopvalves.com/products.html is a kit (with instructions) that replaces your present VFD computer and sensor. Check it out or call Cycle Stop Valves @ 800-652-0207 they will be happy to assist you on Tuesday.