Suction line for 2" deep jet well

Users who are viewing this thread

Jerred18

New Member
Messages
8
Reaction score
0
Points
1
Location
NC
What size suction line should you use for a 2" deep jet well? Single line well.
 

Texas Wellman

In the Trades
Messages
1,035
Reaction score
59
Points
48
Location
SE Texas-Coastal
If you use 1.25" pipe you have to make sure your collars are "turned". Std. collars won't fit in a 2" well. If you use 1" then you have to adapt back to the 1.25" threads because the jets and well head is 1.25".

Are we talking galv. or PVC for the jet line?
 

Masterpumpman

In the Trades
Messages
729
Reaction score
1
Points
0
Location
Virginia Beach, VA
Website
www.dci-inc.us
Texas Wellman said it best! Personally I like 1" PVC with a 1-1/4" to 1" special PVC adapter.
Unless you use turned 1-1/4" pipe couplings the couplings won't fit inside the 2' pipe of if they do they won't allow enough water passed the couplings to work well.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks