Okay, I have a 2" well casing with a single pipe dropped 70 ish feet with ejector and foot valve. I have pulled twice due to foot valve being clogged from the rust from the steel pipe. Going back with plastic!! I dropped a string with big nut attached, hit water at approx 32 feet. I would like to improve pressure and volume. Previously could only run one sprinkler head. Using 1 hp pump. Is there another setup I could use. Would a 1hp shallow well pump pull the water if I dropped pipe to 45 feet with just a foot valve attached. All suggestions will be appreciated, just looking for options to improve water flow.