I have a 2.0 cu.ft. Clack WS1. It softened the water perfectly on the original settings, regenerating every 2,400 gallons. Something happened a while back and water and resin flooded the garage. I think I lost about ½ cu.ft. of resin. Now, the water gets hard after about 1,800 to 2,000 gallons. What settings need to be adjusted to make the system regenerate earlier?
Current setup:
Program code: 20
Capacity: 48000
Lbs salt: 17
The softener is 6 years old.
Current setup:
Program code: 20
Capacity: 48000
Lbs salt: 17
The softener is 6 years old.