I lost my 1.5HP Grundfos to a "Strike" last month.
I bought the same replacement pump (16S15-14) and the reinstall was a fiasco (cracked my main irrigation line in three places with his 10Klb PumpTruck) and wired my Pumptrol 9013 FSG ass backwards. See the last 2 photos and lets see if you guys catch the error?
I noticed this today when I installed my Delta Lightning Arrestor LA 302R
http://www.deltala.com/prod01.htm#LA302R
Very well made in the USA Varistor that must weigh near half a pound. SOLID!
Anywho; reversed the redneck errors and have a "sacrificial lamb" to spare my windings.
Wanted to say THANKS to all the guys who gave advice and helped out with info and advice!
This is a great forum with a fantastic group of folks
Many thanks!!!!!!!!!!!
Regards.....
Greg in SC
PS...The Vycor wrap around the casing is to act as a quasi safety tether holding the 12/2 against the well casing-as I have no safety cable.
I bought the same replacement pump (16S15-14) and the reinstall was a fiasco (cracked my main irrigation line in three places with his 10Klb PumpTruck) and wired my Pumptrol 9013 FSG ass backwards. See the last 2 photos and lets see if you guys catch the error?
I noticed this today when I installed my Delta Lightning Arrestor LA 302R
http://www.deltala.com/prod01.htm#LA302R
Very well made in the USA Varistor that must weigh near half a pound. SOLID!
Anywho; reversed the redneck errors and have a "sacrificial lamb" to spare my windings.
Wanted to say THANKS to all the guys who gave advice and helped out with info and advice!
This is a great forum with a fantastic group of folks
Many thanks!!!!!!!!!!!
Regards.....
Greg in SC
PS...The Vycor wrap around the casing is to act as a quasi safety tether holding the 12/2 against the well casing-as I have no safety cable.
Attachments
Last edited: