I currently have 2- 1967 5.5 gal round toilets on tile that I'd like to replace with 1.28 gal 1-piece elongated ones, but the rough-in distance from the wall to the center of the bolts is 10 3/4" and 10 7/8". Are there any good 1 piece toilets with a 12in rough-in that will work?
The tank lids currently touch the wall and I would like to have the new ones only 1/4 to 1/2 away because it looks nicer and they are small bathrooms. I was looking at the Ultramax II 1.28g and the Cadet 3 compact elongated 1.28 , but it doesn't seem they would fit with the short rough-in. I don't think those even come in 10in rough in. It's hard to find good 10in 1-piece.
Is it possible to get a flange adapter so that a 12in rough-in toilet will fit?
I'd like to have a very good 1-piece elongated toilet that will be close to the wall, without changing the drain plumbing in the floor or floor inlet that's about 8in from center.
Any thoughts?
Thanks
The tank lids currently touch the wall and I would like to have the new ones only 1/4 to 1/2 away because it looks nicer and they are small bathrooms. I was looking at the Ultramax II 1.28g and the Cadet 3 compact elongated 1.28 , but it doesn't seem they would fit with the short rough-in. I don't think those even come in 10in rough in. It's hard to find good 10in 1-piece.
Is it possible to get a flange adapter so that a 12in rough-in toilet will fit?
I'd like to have a very good 1-piece elongated toilet that will be close to the wall, without changing the drain plumbing in the floor or floor inlet that's about 8in from center.
Any thoughts?
Thanks