Converting to double sink-drain pipe too close to stud for double fixture fitting.

Users who are viewing this thread

Finch85

Member
Messages
39
Reaction score
2
Points
8
Location
Roanoke, Virginia
Hello again!

Trying to plan ahead for our bathroom remodel. The plan is to have a double vanity but our bathroom was originally plumbed for one. The problem is that the sink drain pipe is a couple inches from a stud.

I see a couple options but wanted to run it by you guys first.

1. Cut the pipe near the bottom (above the sole plate) and put a couple 45's in to bring it out from the stud. This would give me some clearance to install the double fixture fitting.

2. Cut a section of the pipe out. Go ahead and drill a hole in the stud (at the appropriate height) and place one side of the double fixture into the stud hole. Then install a coupling at the cut bottom drain and run a piece of pipe up into the double fixture fitting making sure the end is still inside the stud hole.

3. Due to the design of our vanity...I'd prefer to do this plumbing inside the wall and not in our cabinet.

Thanks!

mail.google.com.jpg
 

Finch85

Member
Messages
39
Reaction score
2
Points
8
Location
Roanoke, Virginia
In a step by step process...how would you proceed with that?

1. Determine the height to drill the hole.
2. Cut the existing fitting (not sure the of the name) between the drain and vent.
3. Drill the hole into the stud.
4. Slide fitting down onto drain while putting one end of the double fix. fitting into the newly drilled hole.

I guess my only concern was the lack of "wiggle room" of the drain pipe.
 

Dlarrivee

New Member
Messages
1,150
Reaction score
0
Points
0
Location
Canada
You can do it without even using a coupling, this isn't really rocket science.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks