(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Need help id'ing and removing bath/shower cartridge

  1. #1
    DIY Junior Member patiodadio's Avatar
    Join Date
    Feb 2012
    Location
    Medford, NY
    Posts
    1

    Default Need help id'ing and removing bath/shower cartridge

    New to this board and to plumbing in general so any help would be great. I have a two stem (hot/cold) shower/bath faucet set up and I am unable to get the hot to shut all the way off - figuring it is the cartridge. I took off the handle and have provided pictures of the what everything looks like. Here are my questions:
    1) Who manufactures my handles - there is no indications on the handles or the spout
    2) Who manufactures the cartridge?
    3) How do I get the cartridge out? If is stuck, what then?
    4) I need to replace the handles/spout as well (broken internals on both), any recommendations that would fit the piping in the pictures?
    5) How difficult is it to install new faucets?
    Once again, I am stuck and would like to avoid paying someone to do this work if it is pretty straightforward.
    Thanks,
    Tim
    Pictures:
    Name:  picture 1.jpg
Views: 299
Size:  19.2 KBName:  picture 4.jpg
Views: 275
Size:  13.1 KBName:  picture 3.jpg
Views: 256
Size:  12.2 KB
    Attached Images Attached Images  

  2. #2
    Homeowner
    Join Date
    Jan 2010
    Location
    Alabama
    Posts
    1,174
    Blog Entries
    1

    Default

    Its a moen. The stems are held in by a plastic ring......(moen junk) they make a tool that inserts and you unscrew it. You can make a wrench for it also with some coppa pipe. Call Moen and they will have everything you need,including the handle rebuild kit and the wrench to install the new stems they will send you. I'm sure they will send you a spout also.

    Thats a Monticello. Two handle tub and shower valve. polished brass and chrome.

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,602

    Default

    Call 1-800-BUYMOEN and they will send you replacement parts IF you were the original owner of the faucet.
    Licensed residential and commercial plumber

Similar Threads

  1. Removing American Standard Shower Cartridge
    By GoBucks in forum Shower & bathtub Forum & Blog
    Replies: 4
    Last Post: 03-31-2011, 05:53 PM
  2. removing Grohe cartridge
    By deew in forum Shower & bathtub Forum & Blog
    Replies: 4
    Last Post: 10-13-2010, 06:34 PM
  3. Removing stubborn Flushmate cartridge
    By SteveW in forum Toilet Forum discussions
    Replies: 9
    Last Post: 04-18-2010, 10:40 AM
  4. Removing Grohe Ceramic Cartridge
    By dan_public in forum Shower & bathtub Forum & Blog
    Replies: 0
    Last Post: 04-04-2009, 03:10 PM
  5. Removing a threaded cartridge
    By fatheadfred in forum Shower & bathtub Forum & Blog
    Replies: 1
    Last Post: 02-11-2008, 03:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •