(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: New Carrier Natural Gas Furnace - Noisy during ignition

  1. #1
    sea-bee chuck b's Avatar
    Join Date
    Jan 2011
    Location
    levering, michigan
    Posts
    72

    Default New Carrier Natural Gas Furnace - Noisy during ignition

    Since I intend to sell my home when the market rebounds (hope I live long enough), I purchased a new Carrier natural gas furnace. I chose the least expensive as I am hoping to leave as soon as I can. Problem is it is noisy as heck, especially during ignition. The vibration is very pronounced and takes 30 seconds to ignite during the rumbling. I called the installing contractor and he basically said you got the cheapest Carrier and it makes noise. Any thoughts. He is coming out next week just to be sure the fan (housing) is not loose and said he is not replacing it even if it is defectively noisy.

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,388

    Default

    Is this a closed combustion device? If not, normally, the only fan is the circulating fan. If they didn't use a noise isolating fitting between the furnace and the ductwork (it's in all of the installation instructions I've looked at, albeit not that many!), then it will transmit any of that vibration to the ductwork that can act like an amplifier.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    DIY Senior Member Rich B's Avatar
    Join Date
    Sep 2008
    Location
    New Jersey
    Posts
    282

    Default

    A natural gas furnace will have a draft inducer motor that runs before the unit fires. If you hear noise duing the starting sequence, I would look at that little motor first. Maybe something is loose or the motor/fan combination is noisey. Could just be a loose screw or pice of sheet metal making noise.

    The blower fan would not come on untill the unit fires and the control board has been signaled that it has fired. The draft inducer stops running after that as it's not needed.

Similar Threads

  1. Need help with Carrier Furnace and LP connection
    By dcorazal in forum HVAC Heating & Cooling
    Replies: 1
    Last Post: 09-15-2011, 11:29 AM
  2. Carrier 95% Natural Gas Forced Air Furnace
    By sarrowsm in forum HVAC Heating & Cooling
    Replies: 3
    Last Post: 04-02-2011, 01:54 PM
  3. furnace-no ignition
    By pitteach in forum HVAC Heating & Cooling
    Replies: 3
    Last Post: 12-22-2009, 03:26 PM
  4. Furnace - Slight Delayed Ignition
    By Jeff_08 in forum HVAC Heating & Cooling
    Replies: 8
    Last Post: 04-28-2008, 05:24 PM
  5. Williamson Natural Gas Furnace Problem
    By Ted1 in forum HVAC Heating & Cooling
    Replies: 1
    Last Post: 10-11-2007, 07:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •