Ballvalve
General Engineering Contractor
Better is a quick connect fitting from your air compressor. Put a valve behind it, [check or other] click on your air hose and pump it up hands free. Your pressure gauge will read out your charge. Also its 1/4" and flows more, rather than a 1/8"
Do this with the tank perhaps 3/4 empty and the outlet valve closed. pump it up close to the kick on pressure.
But if you just want air you can blow away anytime you like, just dont take a walk and let it go to 120psi. Should use an oilless rig and a dedicated clean hose.
Do this with the tank perhaps 3/4 empty and the outlet valve closed. pump it up close to the kick on pressure.
But if you just want air you can blow away anytime you like, just dont take a walk and let it go to 120psi. Should use an oilless rig and a dedicated clean hose.