I have a garage / workshop that has a small bathroom where I need to replace the existing 20year old toilet, but am limited in space between the front of the bowl and the wall. The existing toilet is a round bowl with dimensions from the flange bolts to the front of the bowl are 12.5" and the toilet is a 12" rough in but a 14" rough in can be installed, the max. I can fit is 14" from flange bolts to front of bowl. I would like a Toto because of the flush ratings seem to be the best, but not all spec sheets on the toto site note the measurements between the flange bolts and the front of the bowl. Any recomendations?