(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Noisy Taco 007 Circulator

  1. #1
    DIY Junior Member greekguy7's Avatar
    Join Date
    Jul 2005
    Location
    Illinois
    Posts
    29

    Default Noisy Taco 007 Circulator

    A couple weeks ago I bought a Taco 007 pump and installed it the other day. The problem is that after I purged the zone properly and powered it up, I did get heat in the zone but the pump is making a bad noise. The boiler pressure is fine, the pump is not mounted upside down or sideways and all the zones work fine. I have a couple other of these same pumps in other zones on this same system and you can barely hear them.

    Have you seen many of these pumps being defective out of the box before? Any ideas or suggestions?

  2. #2
    In the Trades Tom Sawyer's Avatar
    Join Date
    Nov 2010
    Location
    Maine
    Posts
    2,940

    Default

    yes, return it
    [B]No, plumbing ain't rocket science. Unlike rocket science, plumbing requires a license[B]

Similar Threads

  1. Cause of Taco wate circulator noise?
    By goshenplumber in forum Boiler Forum
    Replies: 3
    Last Post: 10-31-2011, 09:21 AM
  2. Taco 006 BC4 Circulator pump running 24/7?
    By scottall in forum Water Heater Forum, Tanks
    Replies: 2
    Last Post: 03-18-2010, 07:42 AM
  3. taco circulator wiring
    By litemine in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 11-25-2007, 03:28 PM
  4. Taco Flo check circulator pump
    By MarkHash in forum HVAC Heating & Cooling
    Replies: 1
    Last Post: 10-04-2007, 08:23 PM
  5. Taco 003 Hot Water Circulator Pump Runs Hot!
    By gplumb in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 03-24-2007, 05:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •