Ballvalve
General Engineering Contractor
My radiant heat high head 26-96f Grundfos is about 12 years old and I am getting some vibration. Bearings getting tired.
I can get an eqiv. taco for about 215$ or get a new Grundfos cartridge for 120$. I know if the stator is scored, the pump is shot, but in no mood to take it apart without a ready replacement. Still pumping fine.
Opinions? Check amp draw to see if over specs would determine bad stator?
http://www.pexuniverse.com/store/product/taco-0011-f4-circulator-pump-ci
They can be had for about $180 at other sites.
I can get an eqiv. taco for about 215$ or get a new Grundfos cartridge for 120$. I know if the stator is scored, the pump is shot, but in no mood to take it apart without a ready replacement. Still pumping fine.
Opinions? Check amp draw to see if over specs would determine bad stator?
http://www.pexuniverse.com/store/product/taco-0011-f4-circulator-pump-ci
They can be had for about $180 at other sites.
Last edited:
