Oliver
New Member
- Messages
- 35
- Reaction score
- 0
- Points
- 0
I am planning to install PEX coils under the sub-floor and terminate them in different zone manifolds. The manifolds will be installed in the crawling space (one story house) little bit (say 14 inches) under the level of the coils.
The question is: am I going to have problems purging the air from the coils (somebody mentioned to me that it is difficult to do it). If so, what would be the right approach to this?
The question is: am I going to have problems purging the air from the coils (somebody mentioned to me that it is difficult to do it). If so, what would be the right approach to this?