queen2neptune
New Member
Hi - I am learning! I have a Weil McLain Gold boiler with 5 zones and with a honeywell triple aquastat -- set at 190 H 160 L diff 25. Yesterday we replaced the Taco circulator thinking this was the problem why the boiler will not start when it calls for heat. We have plenty of hot water. It seems that the boiler will only fire up when it needs to heat the hot water.
Why are the outer rooms so cold? The heat is not working properly -- only a little heat is coming thru?
We have bled each zone to get out any air that might be in the pipes.
Also is the Taco circulator suppose to be hot to the touch.
I really do not want to call a technician to come out again - first of all they are no help and then charge me an arm and a leg for it.
Help Help Help
What could it be? Should we bleed the pipes longer?
Thanks in advance for any suggestions!
Frustrated Home owner
Why are the outer rooms so cold? The heat is not working properly -- only a little heat is coming thru?
We have bled each zone to get out any air that might be in the pipes.
Also is the Taco circulator suppose to be hot to the touch.
I really do not want to call a technician to come out again - first of all they are no help and then charge me an arm and a leg for it.
Help Help Help
What could it be? Should we bleed the pipes longer?
Thanks in advance for any suggestions!
Frustrated Home owner