Proper settings Enertrol

Users who are viewing this thread

GregoryR

New Member
Messages
21
Reaction score
0
Points
0
Location
Maine, USA
Hello,

Could any of you help me with setting this thing (outdoor reset) up properly? People on this site were a real good help last time I had questions, and I thank all of you for your time.

DSC03863.jpg
 

Tom Sawyer

In the Trades
Messages
3,625
Reaction score
34
Points
48
Location
Maine
Set the slide switch to mod and turn the dial to 160 to start. You're up here in Maine with me so, when it gets damn cold out, if the house won't heat, turn the dial up 20 degrees until it will. You can also try going lower if the house is heating ok. The dial is what sets the temperature differential between outside temp and boiler supply temp, adjusted for degree days. I found that 160 to 180 seems to work pretty good around here.
 

GregoryR

New Member
Messages
21
Reaction score
0
Points
0
Location
Maine, USA
Set the slide switch to mod and turn the dial to 160 to start. You're up here in Maine with me so, when it gets damn cold out, if the house won't heat, turn the dial up 20 degrees until it will. You can also try going lower if the house is heating ok. The dial is what sets the temperature differential between outside temp and boiler supply temp, adjusted for degree days. I found that 160 to 180 seems to work pretty good around here.


Done and done, thanks so much. Hopefully we'll see some savings now that this thing is actually doing its job.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks