Hcw3
Member
I have a new water system, including a new pump & pressure tank, chlorinator & carbon filter, and softener.
The carbon filter is a 3M CBF100 "Backwash Filtration System".
3M's documentation for the carbon filter specifies the following:
"A PROPERLY SIZED PRESSURE TANK WILL REQUIRE A MINIMUM PUMP CYCLE OF 60 SECONDS TO REFILL FROM PUMP ON-TO-OFF PRESSURE"
link: http://www.3mwater.com/media/catalog/product/pdfs/3MCBF_Manual.pdf
Can anyone tell me what problems might occur if the pump-on to pump-off period is generally only 12 seconds (with all taps closed)?
Thanks.
--
Harry
The carbon filter is a 3M CBF100 "Backwash Filtration System".
3M's documentation for the carbon filter specifies the following:
"A PROPERLY SIZED PRESSURE TANK WILL REQUIRE A MINIMUM PUMP CYCLE OF 60 SECONDS TO REFILL FROM PUMP ON-TO-OFF PRESSURE"
link: http://www.3mwater.com/media/catalog/product/pdfs/3MCBF_Manual.pdf
Can anyone tell me what problems might occur if the pump-on to pump-off period is generally only 12 seconds (with all taps closed)?
Thanks.
--
Harry