Installation of a water source heat pump

Users who are viewing this thread

budwiser

New Member
Messages
1
Reaction score
0
Points
0
Location
Quebec
Hello:
I am considering to install a water source heat pump'
my house is a single floor bungalow of 2300 sq. feet
with a non finished basement.
the well is 100 ft .from the house at 130 ft. deep 6" casing.
the pump is set at 125 ft. and is a flowteck 1/2 hp.
the water temp. coming into the house is 54deg.f.
When I had installed the well pump I let it run with A 100 FT. of supply line open for seven days straight and it never ran short of water.
The supply line is 1" pvc.
When installed I put in a return line to the well of 1/2 pvc.


Questions:

What size water source heat pump would I require for this size house,
Would it run off the plumbing and well I have now, or would a seperate new well be required
If possible what brand name would you suggest if possible.
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks