(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Peerless Pinnacle Boiler Problem - Help!

  1. #1
    DIY Junior Member nova1966's Avatar
    Join Date
    Aug 2011
    Location
    Chicago
    Posts
    1

    Exclamation Peerless Pinnacle Boiler Problem - Help!

    I currently have a Peerless Pinnacle #PI-80REV1 boiler. After the boiler heats up to 104+ degrees, it shuts off and I receive and error code of F09. I have replaced the ignitor electrode and flame sensor as well as using the troubleshooting guide to check for additional problems. I can let the unit set for a day and push the reset button on the display module and the unit will run. When the temp returns to the 104+ degree, it will turn off.

  2. #2
    Master Hot Water Mpls,MN BadgerBoilerMN's Avatar
    Join Date
    Mar 2011
    Location
    Minneapolis
    Posts
    286

    Default

    Where is your installing contractor?

Similar Threads

  1. Peerless Purefire Boiler shutoff
    By tigger13 in forum Boiler Forum
    Replies: 13
    Last Post: 05-27-2013, 06:28 PM
  2. Aquastat for Peerless Boiler
    By CesKrin in forum Boiler Forum
    Replies: 3
    Last Post: 02-01-2011, 05:04 PM
  3. Peerless Gas boiler - replacement burner tubes
    By BrianP in forum Boiler Forum
    Replies: 0
    Last Post: 01-10-2011, 02:01 PM
  4. Purefire Pinnacle 140 short cycling with Boost
    By winter208 in forum Boiler Forum
    Replies: 1
    Last Post: 01-06-2010, 10:02 AM
  5. Boiler problem.
    By hammerslammer in forum Boiler Forum
    Replies: 3
    Last Post: 10-26-2009, 03:54 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •