Utility Surface Pumps - Zoeller Vs. Wayne

Just looking at surface pumps.....

All these are all plastic....
Is the Zoeller pump going to be a better pump than a Wayne for a utility pump

Zoeller 44
http://www.zoellerpumps.com/ProductBenefit.aspx?ProductID=97

Wayne VIP50
Wayne's site is crawling and can't come up with a link

Surface pumps for the win....I had 2 older Waynes getting down low, while my Zoeller was handling the sump...

Bumpity bump for this thread. Thoughts on better pumps...
Is a Zoeller surface pump just as good as their sumps, or are they all run of the mill and just get the most GPM rated unit.

I intend to buy 2 more for backups...

Well, I found something more effective that I never thought about .....a good ole Shop Vac which won't need at least a 1"+ to prime, will get down further than 1/8" of a inch.
The only downside is footprint in the garage.
So a cheap one with decent capacity and then I'll just dump my current pumps in there to pump the water out when the container is full.

I've got 2 shop vacs already but these are more $$$ HEPA woodworking ones.
These are more like garage queens and the new one will be the daily driver.