Help with well water test results

Users who are viewing this thread

Shooter45

New Member
Messages
21
Reaction score
0
Points
0
Location
MS
We just got our test results back on our well and I have tried pulling a few websites to interpret the results but have not had any luck. Could someone knowledgeable in this area please help with the numbers?
Bacteria was done on a separate test and came back good at 0/100. The other test is listed below.

Well Water
EPA 200.7

Arsenic - ND mg/L 0.0100
Calcium - 2.14 mg/L 5.00
Copper - 0.00149 mg/L 0.0250
Hardness - 9.68 mg/L 0.500
Lead - 0.00544 mg/L 0.0100
Magnesium - 1.05 mg/L 5.00
pH 6.59
 

Shooter45

New Member
Messages
21
Reaction score
0
Points
0
Location
MS
I have also noticed an orange looking film at the bottom of the toilets which I am guessing is iron? There is no noticeable smell to the water at all.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks