(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Help with well water test results

  1. #1
    DIY Junior Member Shooter45's Avatar
    Join Date
    Mar 2011
    Location
    MS
    Posts
    21

    Default Help with well water test results

    We just got our test results back on our well and I have tried pulling a few websites to interpret the results but have not had any luck. Could someone knowledgeable in this area please help with the numbers?
    Bacteria was done on a separate test and came back good at 0/100. The other test is listed below.

    Well Water
    EPA 200.7

    Arsenic - ND mg/L 0.0100
    Calcium - 2.14 mg/L 5.00
    Copper - 0.00149 mg/L 0.0250
    Hardness - 9.68 mg/L 0.500
    Lead - 0.00544 mg/L 0.0100
    Magnesium - 1.05 mg/L 5.00
    pH 6.59

  2. #2
    DIY Junior Member Shooter45's Avatar
    Join Date
    Mar 2011
    Location
    MS
    Posts
    21

    Default

    I have also noticed an orange looking film at the bottom of the toilets which I am guessing is iron? There is no noticeable smell to the water at all.

  3. #3
    DIYer, not in the trades LLigetfa's Avatar
    Join Date
    Feb 2011
    Location
    NW Ontario, Canada
    Posts
    3,685

    Default

    Perhaps posting to the softener forum would get you more replies.

    http://www.terrylove.com/forums/foru...on-and-reviews

Similar Threads

  1. Well Water test results. Recommendations?
    By novas in forum Pumps and Tanks Well Forum & Blog
    Replies: 8
    Last Post: 02-23-2011, 10:57 AM
  2. Can Anybody Here Read Water Test Results? Need Help Deciding on Water Softner Type.
    By kozaz in forum Water Softener Forum, problems, installation and reviews
    Replies: 3
    Last Post: 03-15-2010, 11:40 PM
  3. New well completed -- Please review water test results
    By mrmichaeljmoore in forum Water Softener Forum, problems, installation and reviews
    Replies: 11
    Last Post: 07-28-2009, 02:59 PM
  4. Well water test results
    By WV Hillbilly in forum Pumps and Tanks Well Forum & Blog
    Replies: 7
    Last Post: 10-03-2008, 01:10 PM
  5. well test results
    By evans in forum Pumps and Tanks Well Forum & Blog
    Replies: 10
    Last Post: 12-16-2006, 06:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •