(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: where to buy overhaul kit for pentair, flowtec, craftsman ect.?

  1. #1
    DIY Junior Member m151's Avatar
    Join Date
    Aug 2011
    Location
    northern california
    Posts
    5

    Default where to buy overhaul kit for pentair, flowtec, craftsman ect.?

    I have a few jet pumps that are getting tired, and I would like to get a kit, instead of ordering the impeller,
    diffuser, and seal separately from sears. I see lots of kits on the web for pentair, but no cross reference
    to my sears model #s. Does any one know a website that sells these kits? Please don't jump on me
    because they are cheap plastic pumps, They are easy to repair, last over 10 years, cheap on craigslist
    and the A.O.Smith motors never break. I am happy with these pumps.

    thanks
    Jim

  2. #2
    DIY Junior Member lockewell's Avatar
    Join Date
    Aug 2011
    Location
    Orlando, FL
    Posts
    8

    Default

    Usually when the pump manufacturer private labels for another company, it is real difficult to cross back to the orginal manufacturer.

  3. #3
    DIY Junior Member m151's Avatar
    Join Date
    Aug 2011
    Location
    northern california
    Posts
    5

    Default

    I think I have found the kits. The Craftsman pumps seem to be the same as the flotec 4300 series. I searched for the owners manuals online
    and the part #s seem to match. The number for the 1/2 hp kit is FFP1511, 3/4 is FFP1512, and 1hp is FFP1513. I found the 1511 kit online
    for as low as $38.00. I will let everybody know in a few weeks if this works.
    Thanks
    Jim

Similar Threads

  1. Flowtec shallow well Jet pump= JUNK!!!
    By bbigstack77 in forum Pumps and Tanks Well Forum & Blog
    Replies: 5
    Last Post: 02-05-2010, 08:40 AM
  2. Flowtec shallow well Jet pump= JUNK!!!
    By bbigstack77 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 02-03-2010, 08:09 AM
  3. Craftsman shallow well jet pump
    By katenjoe in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 02-19-2007, 01:02 AM
  4. Crane Neuton overhaul
    By fidelityflip in forum Toilet Forum discussions
    Replies: 0
    Last Post: 08-12-2005, 12:22 PM
  5. complete supply overhaul, flow is too low everywhere
    By kirkwood in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 10-10-2004, 07:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •