DonL
Jack of all trades Master of one
Good catch Don. Base polarity is an important thing. So what do they call that output, a cascaded emitter follower or something like that?
No a cascaded emitter follower uses the same type of transistor, Typically 2 NPNs, I do believe.
It is a complementary pair.
I personally do not like to direct couple transistors, I would have put a 1K resistor on the base of Q2.
But that is a mater of personal preference.
With a limiting resistor at least if one transistor gos bad, It don't take out the other.
Then you have to add more smoke, because it all gets let out. lol
I hope You are having a enjoyable Weekend.
DonL
Last edited: