I pulled 40 feet of 1 inch steel suction pipe out of 2 inch casing. After installing a new system I realized that I wasn't getting proper flow. I checked the extracted steel pipe and found that the end (jet nozzle) had rusted off and is stuck in the casing, restricting the flow. My plan is to pull the new PVC out and use links of 1/2 inch steel pipe, coupled together, down the casing and push the old nozzle out of the casing and let it drop, thus freeing up the restriction. Does this sound logical? Since I am not a well man, I'm guessing there is some things I am not thinking about that can be an issue. Any suggestions or advice are welcome and appreciated.
Thanks
Thanks