DavidTu
Member
Have cast iron 2" tub drain & p-trap in place. Now need to connect the W&O to that. As there will not be any access panels am I correct that I cannot use a slip-joint type W&O kit and/or connection to the CI drain? (I've seen HJ claim in a thread he hasn't installed an access panel in 50 years... so who is using all these tubular W&O kits?! They all use slip joints, right?)
Assuming no access panel, then, am I correct in thinking my only option is a ABS or PVC sch 40 kit that is glued up? If not, what other options are there? (I would make the connection to the drain, then, with a Mission Coupling 2" CI to 1.5" plastic, right?)
The only "remote operated" drain I see for Sch40 W&O is the cable-driven ones. Any recommendations (i.e. brands) or cautions?
Assuming no access panel, then, am I correct in thinking my only option is a ABS or PVC sch 40 kit that is glued up? If not, what other options are there? (I would make the connection to the drain, then, with a Mission Coupling 2" CI to 1.5" plastic, right?)
The only "remote operated" drain I see for Sch40 W&O is the cable-driven ones. Any recommendations (i.e. brands) or cautions?