(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Need help identifying manufacturer (need plastic parts)

  1. #1
    DIY Junior Member gimgim's Avatar
    Join Date
    May 2011
    Location
    San Diego, CA
    Posts
    2

    Default Need help identifying manufacturer (need plastic parts)

    Hi, I am new.. I've looked at a few "need help identifying" posts, but I couldn't find anything similar to what I have.

    All the faucets in my house look from the same manufacturer/series. I am attaching a picture of the sink. The faucets in the tub have some clear plastic parts that are cracked (one had already been fixed). I've epoxied them and they may last a little, but I am afraid they will break again. Since the problem is with the tub, replacing everything is way too complicated for me.
    I would like to identify a supplier for the clear plastic parts and buy a few, just in case...
    The house is about 13 years old.

    THANKS!!!!

    G.
    Name:  IMG_20110529_231106.jpg
Views: 95
Size:  75.9 KBName:  IMG_20110529_231159.jpg
Views: 95
Size:  36.9 KBName:  IMG_20110529_231309.jpg
Views: 96
Size:  65.3 KBName:  IMG_20110529_231333.jpg
Views: 95
Size:  72.3 KBName:  IMG_20110529_231057.jpg
Views: 96
Size:  70.7 KB

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,209
    Blog Entries
    1

    Default

    The lav faucet is the Monticello series by Moen.

    http://www.moen.com/monticello/chrom...ONSUMER%3A4551

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    The monticello is notorious for problems with the handle adapter. I think Moen might send you all new handles with the updated handle adapter. Notice on the parts diagram there are new/old versions of that adapter. 1-800-BUY-MOEN

  4. #4
    DIY Junior Member gimgim's Avatar
    Join Date
    May 2011
    Location
    San Diego, CA
    Posts
    2

    Default

    THANKS THANKS THANKS!!!
    I am impressed...

Similar Threads

  1. Which Manufacturer?
    By wagoneer89 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 05-30-2010, 11:44 AM
  2. Please help in identifying the faucet manufacturer/model
    By kenga_can in forum Shower & bathtub Forum & Blog
    Replies: 3
    Last Post: 02-16-2009, 06:46 AM
  3. Manufacturer Testimony
    By Garydaplummer in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 01-26-2008, 07:58 AM
  4. Why does the Manufacturer say this?
    By edwardh3 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 01-14-2008, 09:06 AM
  5. Manufacturer recommendation
    By mrs3720 in forum Shower & bathtub Forum & Blog
    Replies: 2
    Last Post: 11-15-2005, 05:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •