Shahnaimath
New Member
Hi all
we have a single main supply line which is supplied by pressure pump of 20 psi. This main supply line is divided into three sublines and each subline is connected to swimming pool heater/cooler. The pressure reading in each subline is about 15 psi..... but our requirement is about 2.5bar in each subline...
If I attach a pressure pump at dividing point of main supply line, can it cover my requirement...or is there any better way to achieve my requirement....
and what should be the specifications of the pressure pump to achieve my requirement.
Please help...
we have a single main supply line which is supplied by pressure pump of 20 psi. This main supply line is divided into three sublines and each subline is connected to swimming pool heater/cooler. The pressure reading in each subline is about 15 psi..... but our requirement is about 2.5bar in each subline...
If I attach a pressure pump at dividing point of main supply line, can it cover my requirement...or is there any better way to achieve my requirement....
and what should be the specifications of the pressure pump to achieve my requirement.
Please help...