tikicarver
New Member
Just had new granite counters installed.
We bought a new Kohler cast iron porcelain coated sink, drop in style.
The problem-- the edge of the sink is not flush with the counter.
It looks like the sink is warped. The opposite corners are 1/8 off.
For example if I press the right front corner down to touch the counter,
the left rear corner will have an 1/8" gap with the counter.
I checked the granite, it is level and flat.
I'm wondering if this is normal with cast iron sinks or is the sink defective.
We bought a new Kohler cast iron porcelain coated sink, drop in style.
The problem-- the edge of the sink is not flush with the counter.
It looks like the sink is warped. The opposite corners are 1/8 off.
For example if I press the right front corner down to touch the counter,
the left rear corner will have an 1/8" gap with the counter.
I checked the granite, it is level and flat.
I'm wondering if this is normal with cast iron sinks or is the sink defective.