(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Price Pfister Kitchen Faucet Installation

Hybrid View

  1. #1
    DIY Junior Member BillM's Avatar
    Join Date
    May 2007

    Default Price Pfister Kitchen Faucet Installation

    Good morning all,
    I am installing a 'low end' Price Pfister kitchen faucet, Model # F-WK1-1. Single Control faucet....Installed just fine, except that there is a plastic hose connector tube, to accept Spray Hose attachment.....it should just be a simple 'push in, and connect' type setup, but I've been trying that as per the Pfister instructions, and I'm getting nowhere? Does anybody know if this could just be a defect to my particular faucet, or is this a known problem with this model? Thanks in advance...

    Last edited by Terry; 04-17-2011 at 10:42 AM.

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Bothell, Washington
    Blog Entries


    They sometimes are a little glitchy pushing on. Sometimes you can pull back the fitting a bit, and that helps to open up the end.

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    New England


    Some of those fittings are similar to what is used on air hoses and natural gas hoses for say a barbeque...the springs may not retract enough to insert it unless you pull the ring back as Terry indicated.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Cave Creek, Arizona


    Try squeezing the two tabs while pushing it onto the faucet stub.

  5. #5


    Hi Bill,

    We're sorry to hear about the problem you’re experiencing with installing the Pfister faucet. We migth be able to help, but our Consumer Service Team needs some additional information to proceed.

    Please provide:

    * The model number of the product. If you do not know this, please follow these directions: http://www.pfisterfaucets.com/do_it_...lf/how_to.aspx
    * Any other specifics on the issue you’re experiencing
    * A method to contact you (ex. email, phone, etc.)
    * Best time for contact (ex. mornings, evenings, etc.)
    Please send this information to us at pfistersocial@bdhhi.com.

    We apologize for your inconvenience and look forward to resolving this matter as soon as possible.


    The Pfister Team

    Pfister is a part of the Stanley Black & Decker Hardware and Home Improvement (BDHHI) Group.

Similar Threads

  1. Price Pfister Pull-Out Kitchen Faucets
    By Kiko in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 01-05-2011, 02:48 PM
  2. Price Pfister Kitchen Diverter Tee
    By pmizell in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 9
    Last Post: 12-13-2009, 05:20 PM
  3. Price Pfister single handle kitchen faucet - sticky lever
    By Probedude in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 6
    Last Post: 05-11-2009, 06:05 AM
  4. Issue with the Installation of a Price Pfister shower valve body
    By leed613 in forum Shower & bathtub Forum & Blog
    Replies: 8
    Last Post: 11-29-2008, 05:28 PM
  5. grrrr leaking price pfister kitchen faucet
    By aislinnluv in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 10-02-2008, 11:47 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts