Fleck 5600SXT can't get back to all my settings??

**Davisracing9** · 04-09-2011, 11:10 AM

I recently installed a Fleck 5600SXT and went through all the programing, but now I can't get back to all the info that I could previously? When I go into the setting mode it only gives me the options to set DO, RT, Hardness, and the percentage safety. Just trying to figure out what I am doing wrong? Thanks

**Akpsdvan** · 04-09-2011, 12:26 PM

Why is there a need to get back into the programing mode?

**Davisracing9** · 04-09-2011, 04:42 PM

Well, when I first hooked it up I set my "C" to 32 because I bought a 32000 grain system but then read some where else that it should be set to 20 for the "Salt Efficiency Method"? So I am thinking I should not have changed the settings initially? thanks

**Akpsdvan** · 04-09-2011, 04:55 PM

When you bought the unit did it come with this book?
http://www.pentairwatertreatment.com...al%2042713.pdf

**Davisracing9** · 04-11-2011, 09:05 AM

How about you give me a fish this time and not try to teach me how to fish. I have the manual but I need to know which reset I should use?

**Akpsdvan** · 04-11-2011, 09:36 AM

Water test?
Number of people in the house?

You can either use gallons or a % of the capacity as the reserve.

I use the gallons, -X based on number of people in the home.

Some use 60 gallons per person per day others use 75 gallons per day per person.

**WellWaterProducts** · 04-12-2011, 03:05 PM

Originally Posted by Davisracing9

I recently installed a Fleck 5600SXT and went through all the programing, but now I can't get back to all the info that I could previously? When I go into the setting mode it only gives me the options to set DO, RT, Hardness, and the percentage safety. Just trying to figure out what I am doing wrong? Thanks

The company who sold it to you won't help you?