(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 7 of 7

Thread: Fleck 5600SXT can't get back to all my settings??

Hybrid View

  1. #1
    DIY Junior Member Davisracing9's Avatar
    Join Date
    Apr 2011
    Location
    Sun City, Arizona
    Posts
    3

    Default Fleck 5600SXT can't get back to all my settings??

    I recently installed a Fleck 5600SXT and went through all the programing, but now I can't get back to all the info that I could previously? When I go into the setting mode it only gives me the options to set DO, RT, Hardness, and the percentage safety. Just trying to figure out what I am doing wrong? Thanks

  2. #2
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,464

    Default

    Why is there a need to get back into the programing mode?

  3. #3
    DIY Junior Member Davisracing9's Avatar
    Join Date
    Apr 2011
    Location
    Sun City, Arizona
    Posts
    3

    Default

    Well, when I first hooked it up I set my "C" to 32 because I bought a 32000 grain system but then read some where else that it should be set to 20 for the "Salt Efficiency Method"? So I am thinking I should not have changed the settings initially? thanks

  4. #4
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,464

    Default

    When you bought the unit did it come with this book?
    http://www.pentairwatertreatment.com...al%2042713.pdf

  5. #5
    DIY Junior Member Davisracing9's Avatar
    Join Date
    Apr 2011
    Location
    Sun City, Arizona
    Posts
    3

    Default

    How about you give me a fish this time and not try to teach me how to fish. I have the manual but I need to know which reset I should use?

  6. #6
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,464

    Default

    Water test?
    Number of people in the house?

    You can either use gallons or a % of the capacity as the reserve.

    I use the gallons, -X based on number of people in the home.

    Some use 60 gallons per person per day others use 75 gallons per day per person.
    Last edited by Akpsdvan; 04-11-2011 at 09:48 AM.

  7. #7
    In the trades WellWaterProducts's Avatar
    Join Date
    Feb 2011
    Location
    Northwood NH
    Posts
    126

    Default

    Quote Originally Posted by Davisracing9 View Post
    I recently installed a Fleck 5600SXT and went through all the programing, but now I can't get back to all the info that I could previously? When I go into the setting mode it only gives me the options to set DO, RT, Hardness, and the percentage safety. Just trying to figure out what I am doing wrong? Thanks
    The company who sold it to you won't help you?
    ----
    Chris Kofer
    h2oguy.com




Similar Threads

  1. Fleck 5600SE settings
    By burleymike in forum Water Softener Forum, problems, installation and reviews
    Replies: 15
    Last Post: 09-17-2011, 04:58 AM
  2. Settings for our new Fleck 2510sxt 48,000 gr. softener w/ 1.5 cu' SST 60 resin
    By k8ie in forum Water Softener Forum, problems, installation and reviews
    Replies: 9
    Last Post: 04-08-2011, 08:12 PM
  3. Fleck 2510sxt - Problem with losing my settings over time
    By chargedmr2 in forum Water Softener Forum, problems, installation and reviews
    Replies: 8
    Last Post: 04-03-2011, 10:20 AM
  4. Fleck 9000 settings question
    By Kurt Eric in forum Water Softener Forum, problems, installation and reviews
    Replies: 3
    Last Post: 10-10-2009, 10:11 AM
  5. Fleck 5600sxt
    By hotrodjohn in forum Water Softener Forum, problems, installation and reviews
    Replies: 5
    Last Post: 04-21-2009, 02:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •