EdHitchens
New Member
We have an electric Kenmore Power Miser 9 (40 gal) water heater installed in our laundry/utility room. In the very next room is our second bathroom, a 3pc: sink, toilet, shower. For some reason the water feed to the "hot" sink faucet takes a long time to get hot. It runs cold or room temp for what feels like a minute or two before starting to heat up and eventually reach proper hot temperature. The shower (uses lever-style faucet) is fine.
The bathroom was here before we moved in so we don't know if the plumbing was routed after the house was already completed or roughed-in during construction. Any ideas on what I could check or what might cause this? Thanks.
The bathroom was here before we moved in so we don't know if the plumbing was routed after the house was already completed or roughed-in during construction. Any ideas on what I could check or what might cause this? Thanks.