Chlorine pump advise for water treatment needed.

Users who are viewing this thread

dhp78

New Member
Messages
1
Reaction score
0
Points
0
Location
NY
Hi.

I have a stenner pump that stopped working. Something is seized but I am not sure what it is. I think it is in the flow rate controller but I can't get it off. I can turn it to release it but it is stuck on the shaft. I tried pry bars and mallets and can budge it. The pump head was really stuck too, but I got that off. At one point I had a crack in my supply line which sprayed bleach all over everything so that might have contributed.

Questions:

1. Is there any way to get this apart so I can check for damage and repair?

2. The parts seem very expensive even if it can be repaired. Is it even worth messing with or should I just get a new pump?

3. Is the stenner the best solution or would I be better off with another pump type/brand?

Thanks,

dhp
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks