what do they call this fitting?

Billfig · Mar 8, 2011

I have a 1"check valve on my tank tee, the Plastic Elbow thet screws into it and then slides into the 1-1/4" plastic tubing/pipe from my well. It appears this elbow has a very slight leak so I was thinking when I reseal the threads, maybe I should put a brass one in-I also could use an extra 1"-2" anyways for better alignment. any links to what I'm after? TIA!

Valveman · Mar 8, 2011

Just looks like a 1" insert elbow. Maybe called a 1" barb to thread elbow.

Sponsor · 2022-01-29T12:20:58-0800

Billfig · Mar 8, 2011

Thanks! Is brass-best then black plastic then nylon?

WellWaterProducts · Mar 9, 2011

billfig said:
I have a 1"check valve on my tank tee, the Plastic Elbow thet screws into it and then slides into the 1-1/4" plastic tubing/pipe from my well. It appears this elbow has a very slight leak so I was thinking when I reseal the threads, maybe I should put a brass one in-I also could use an extra 1"-2" anyways for better alignment. any links to what I'm after? TIA!

http://www.campbellmfg.com/catalog/a05.htm

Billfig · Mar 9, 2011

Thanks for the link! I ended up replacing the plastic insert with a brass street elbow and a brass barb. I think everything is great now...better be!lol

what do they call this fitting?

Users who are viewing this thread

Billfig

New Member

Valveman

Cary Austin

Sponsor

Paid Advertisement

Billfig

New Member

WellWaterProducts

In the trades

Billfig

New Member

Similar threads