Two 6A devices on a 15A circuit (?)

Geniescience · Mar 5, 2011

Can I hear whether this is definitely unwise, or if it's acceptable:
Two 6A devices on a 15A circuit.

Neither require a dedicated circuit.
The circuit is below the kitchen countertop.

Gary Swart · Mar 5, 2011

If 6 + 6 still = 12, and as long as the devices will not exceed 15 amps total, you're good to go.

Sponsor · 2022-01-29T12:20:58-0800

LLigetfa · Mar 5, 2011

We generally tend to follow the 80% rule for single fed devices. However, many of the equipment I deploy have load balancing power supplies fed by two or three circuits so if one circuit were to fail the other one or two need to be able to pick up the slack so I have to base it on worst case possibility.

http://ecmweb.com/mag/electric_sizing_circuit_breaker/

Gary Swart · Mar 5, 2011

80% of 15 = 12. I still say the would be no problem.

Jimbo · Mar 5, 2011

I we cannot put two 6 amp loads on a 15 amp circuit, we will have to re-write the building codes and completely rethink how we live!!!!!

Two 6A devices on a 15A circuit (?)

Users who are viewing this thread

Geniescience

Homeowner

Gary Swart

In the Trades

Sponsor

Paid Advertisement

LLigetfa

DIYer, not in the trades

Gary Swart

In the Trades

Jimbo

Plumber

Similar threads