bubbalooey
New Member
I live in Florida, had a well installed at my house for lawn watering, it was 29' and has always had plenty of water. I have a p.s.i. gauge on my pump, when it is not running it reads 60psi, when I run my zones it never drops less than 50psi, reason being I didnt want to put a lot of sprinkler heads on one zone, but I could have. I want to install a well at my daughters home and my question is what length of sand screen pipe should I use? The local stores have them in 3' and 10' sections, I didn't notice what length was used in my well. I'm using 1 1/4" PVC and it will be about 25'-30' deep max, along with a Myers 3/4 hp motor. Thanks
Last edited: