templar2b1ask1
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
I trying to finish installing a Central Boiler wood fired heating unit.
Visit their website:
http://www.centralboiler.com/
I am concerned about what will happen when the hot water moves through the insulated underground PEX line to the hard copper connection in the basement to the hot water tank & heat exchanger in the forced air furnace.
My questions are:
1. Do I need a flexible copper fitting where these lines connect at the transition?
2. Should I use a copper "Fast/Flex" connector as manufactured by Slant/Fin, Greenvale, N.Y. 11546 Phone 516-484-2600?
There is nothing on their website http://www.slantfin.com/contact.html
3. Is there another product available which gives the same flexible transition from hard copper to plastic PEX pipe?
Thank you for any advice!
Jerry Gibbons
Dowling, MI
Visit their website:
http://www.centralboiler.com/
I am concerned about what will happen when the hot water moves through the insulated underground PEX line to the hard copper connection in the basement to the hot water tank & heat exchanger in the forced air furnace.
My questions are:
1. Do I need a flexible copper fitting where these lines connect at the transition?
2. Should I use a copper "Fast/Flex" connector as manufactured by Slant/Fin, Greenvale, N.Y. 11546 Phone 516-484-2600?
There is nothing on their website http://www.slantfin.com/contact.html
3. Is there another product available which gives the same flexible transition from hard copper to plastic PEX pipe?
Thank you for any advice!
Jerry Gibbons
Dowling, MI
