Watson524
Member
This is stupid, I know, I accept that...
We have the shower all back together and have two plastic pieces that go around the "pins" sticking out of the top and bottom hinge side of the door. One is a fatter (white), fully enclosed circle piece that seems stronger, but leaves the door sitting up on its "lip" because it's just a tad too fat to let it slide all the way down to the door frame itself. So you have the bit of pin sticking out the bottom but then some pin showing at the door edge.... then there's a 3/4 circle piece (black), not QUITE as tall and much thinner black ring.
I should have looked when we took it all out and I can't find a picture online but I think the fatter fully circled piece should go on the bottom but for the fact that the door is basically then just having a "lip" resting on the plastic piece vs sitting down the way it should.
Can anyone tell me what's what? It fits only one way which is probably my answer but it just doesn't seem right.
We have the shower all back together and have two plastic pieces that go around the "pins" sticking out of the top and bottom hinge side of the door. One is a fatter (white), fully enclosed circle piece that seems stronger, but leaves the door sitting up on its "lip" because it's just a tad too fat to let it slide all the way down to the door frame itself. So you have the bit of pin sticking out the bottom but then some pin showing at the door edge.... then there's a 3/4 circle piece (black), not QUITE as tall and much thinner black ring.
I should have looked when we took it all out and I can't find a picture online but I think the fatter fully circled piece should go on the bottom but for the fact that the door is basically then just having a "lip" resting on the plastic piece vs sitting down the way it should.
Can anyone tell me what's what? It fits only one way which is probably my answer but it just doesn't seem right.