(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Fleck 7000 Problem

  1. #1
    DIY Junior Member ArayT's Avatar
    Join Date
    May 2009
    Location
    Middle Georgia
    Posts
    28

    Default Fleck 7000 Problem

    Got it fixed!! Idiot me mistook the PM light for the flow light.

    Need advise on programming valve. I Try to enter extended program mode (via v^ simu for 5 seconds at 12:01pm) the programming light comes on, I push the extra cycle botton and A-10 displays. The up and down allows me to changes this. Now the problem I push the extra cycle button again and it brings be right back to the time. It will not let me continue. Any advise would be appreciated.
    Thanks, Ray
    Last edited by ArayT; 02-02-2011 at 04:29 PM.

  2. #2
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,790

    Default

    If you aren't locked out, and I don't know what you see if you are, then the circuit board would be bad IMO.
    Gary Slusser Retired (= out of business)
    Click Here to learn how to correctly size or program a water softener.
    CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.

  3. #3
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,464

    Default

    Which control is it that you have?
    The first generation was red read outs, the second generation is of an LCD read out, black on a greenish background?

    Neither have a lock out ...

    It is possible that you have gotten in a loop of sorts and there is a way of a Master Reset to factory settings.. once that is done you would need to reprogram the settings for default days , backwash time and the rest of the settings that where set for your water and useage.

Similar Threads

  1. Fleck 2510sxt - Problem with losing my settings over time
    By chargedmr2 in forum Water Softener Forum, problems, installation and reviews
    Replies: 8
    Last Post: 04-03-2011, 10:20 AM
  2. Fleck 9100 Useage Mete Problem
    By Gerrylc in forum Water Softener Forum, problems, installation and reviews
    Replies: 6
    Last Post: 12-28-2010, 07:12 AM
  3. Help Programming a Fleck 7000 SXT
    By batboy in forum Water Softener Forum, problems, installation and reviews
    Replies: 36
    Last Post: 09-03-2010, 06:43 PM
  4. Fleck 5600 Valve Problem
    By filadajunk in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 7
    Last Post: 12-17-2007, 09:52 PM
  5. fleck 7000 or clack ?? help
    By gerrythegreat in forum Pumps and Tanks Well Forum & Blog
    Replies: 4
    Last Post: 11-24-2006, 08:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •