OKAY, I figured it out. Here goes...
It was a sediment problem. Yesterday I wanted to clean out my Water Softener and start fresh. So I emptied the tanks while shutting off the power to both. And drained all the pipes
( BUT FORGOT TO OPEN A FAUCET!!!). So after the drain, install a fresh 10 inch filter, Started up the pump, while the while faucets CLOSED and it took quite some time to get water into the HW tank. So I tried a couple things like releasing pressure on the side of HW tank, air come out. Open a faucet for a few seconds, A LOT OF AIR COME OUT. aND STILL NO WATER.
So drained both tanks for the second time. Filled them up with faucets still closed. At this point I still didn't know the faucets should have been open. And after a second time, the HW tank did not want to fill, very slow it seemed. Drained both tanks for the 3rd time. ( Now you could imagine my frustration around 11pm with trial and error and a hopeful wife) I thought around 12 a.m., hey, let me check on that filter after all these refills. The "NEW" 10 inch filter now had 100s of gallons of water pass through it, that it was completely clogged up. Silt, sand, heck for all I know I found gold with all this draining and refilling leaving the well probably low.
I figured let me start her up without the filter and see if that was the problem, well to my surprise, it was!!! Some great fellas here on the forum told me to leave the faucets open til I filled the tanks and see water come up and without the filter water was able to come blasting out of the faucets. I was so happy you guys have no idea. But now my proble lies with there being too much sand in my wellenough for it to clog a filter that quickly.
Well this morning, ran over to Home Depot, grabbed some new filters, and drained the system yet again and started over frash and the "RIGHT" way. I am doing a system regeneration right now so still no shower for a couple of hours.
My final question I guess now lies with the sediment and what should I do to get clear water. Should I wait a few days to allow our well to fill up and sart over with cleaner water? Or is there a sort of screen in the well that needs to be replced? Or the pipe in the well too low it's picking up dirt?
I really appreciate your input last night, you saved me a lot of money. So direct me to the "DONATE" button cause I support this idea of helping people out without costing one say 500.00, who knows how much this would have cost me, "dirty filter". LMAO!!!