Not to my knowledge.
After much much research I decided I am going to buy a water softener and wanted the Clack Valve, after more research I have stepped into the politics to find they have changed their internal policies for whatever reason. Question: Does anybody sell the Clack Valve now with or without a system and am I locked into using a local that wants 1800 to 3000 for what I could have bought less than a year ago for under a 1k ?? anywhere else I can find to buy from?? Thanks for any input
Not to my knowledge.
Click Here to learn how to correctly size or program a water softener.
CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.
If you want a Clack unit, I can get it for you. Post your e-mail address and I will give you all the details.
I have a Clack WS1 that appears to have a bad water meter, as it will not countdown the gallons after a regeneration, initiated manually. It just stays at 2400 gallons remaining always. Does anyone know where or how I can order a new meter? It is part number V3003. Please reply at email@example.com
Find a dealer in your area that sells the valve.
There are as you may have found no more internet sales of clack units..
Any one having one drop shipped is walking a fine line....
Our local plumbing supply store carries Clack equipment with the Sterling label on it. Others will put their labels and there may be slight variations in models available. Nowhere on the valve does it say Clack.
I suppose I'm in about the same boat. I searched around and found that many used to say the Clack is a good DIY'er. A local guy installs the Autopure units, which I believe uses a Clack valve. However, if I use him and have a problem, it looks like I would have to call him back out anyway if parts need replaced because I couldn't get them online....? So I guess Clack really is NOT a good valve for DIY'ers afterall?
Can you get me 2 Clack ws1 control heads?
Last edited by tntent805; 04-13-2013 at 12:31 AM.