(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Simple Question 5600 Econominder

  1. #1
    DIY Junior Member gizzy's Avatar
    Join Date
    Jan 2011
    Location
    Michigan
    Posts
    1

    Default Simple Question 5600 Econominder

    My softener runs every 5-6 days. It needs to run every 2-3 days. If I manually regenerate, everything is fine. How do I get it to run more often?

    The manufacturer website is very vague on this. Help!

    -gizzy

  2. #2
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,464

    Default

    Is it a meter or day?
    In the lower right hand corner is either a 12 day wheel or a wheel that goes from 0-21 that is a gallon counter..

  3. #3
    DIY Member JKERN's Avatar
    Join Date
    Jan 2011
    Location
    Artesia NM
    Posts
    49

    Default

    I would guess that yours is a metered since econominder is generally referring to the metered 5600. Trick your unit by turning the capacity down. You need to figure out your gallonage usage first and then turn it to whatever that usage is in 2-3 days. On the other hand is that if this unit was set correctly for your water makeup and usage this is probably an indication that something is not working. How old is your unit and are you sure it was set properly at the initial startup?

  4. #4
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,790

    Default

    If there is nothing wrong causing hard water breakthrough before regeneration, you can click the link in my signature to learn how to determine when it should regenerate.
    Gary Slusser Retired (= out of business)
    Click Here to learn how to correctly size or program a water softener.
    CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.

Similar Threads

  1. Fleck 5600 Econominder
    By brew24 in forum Water Softener Forum, problems, installation and reviews
    Replies: 10
    Last Post: 05-26-2011, 09:14 PM
  2. Fleck 5600 vs. 2510, Econominder vs. SXT
    By borisgoodenough in forum Water Softener Forum, problems, installation and reviews
    Replies: 2
    Last Post: 01-14-2011, 12:14 PM
  3. Simple question
    By eod4647 in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 10-27-2009, 12:04 PM
  4. a simple question
    By jwelectric in forum Electrical Forum discussion & Blog
    Replies: 84
    Last Post: 12-08-2008, 02:21 PM
  5. Flack 5600 question
    By Sprink669 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 04-05-2008, 11:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •