(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 8 of 8

Thread: Fernco Ty-Seal Part No?

  1. #1
    I&C Engineer (mostly WWTP) Lakee911's Avatar
    Join Date
    Aug 2005
    Location
    Columbus, OH
    Posts
    1,328

    Default Fernco Ty-Seal Part No?

    What's Fernco's part number for the widget to join 4" PVC to a 4" Cast Iron Bell?

    Thx
    Jason

  2. #2
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    I don't know the part number, but they are all marked as to what combination of pipes they fit, so you really don't have to have a number.

  3. #3
    I&C Engineer (mostly WWTP) Lakee911's Avatar
    Join Date
    Aug 2005
    Location
    Columbus, OH
    Posts
    1,328

    Default

    Ya, but I couldn't find it on their website.

    Thx,
    Jason

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,634

    Default tyseal

    One reason you did not find it is that they only make connectors for plain end to plain end pipes. For the hub insert you have to go to the Tyler Pipe site.

  5. #5
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    If you are looking for a donut seal for the bell, you need to measure the ID of the bell and take that measurement to the plumbing supply. I don't see a Fernco that goes over the bell. Try the other supplier mentioned by hj.

  6. #6
    Plumbing Contractor srdenny's Avatar
    Join Date
    Sep 2004
    Location
    SF Peninsula
    Posts
    361

    Default

    Check out what hj had to say on this topic in 2001.
    http://www.terrylove.com/wwwboard/messages2/17899.html

    You might be better off cutting the hub off the end of the pipe and joining the CI to the PVC with a Mission CP44 or an equivalent Fernco coupling.

  7. #7
    I&C Engineer (mostly WWTP) Lakee911's Avatar
    Join Date
    Aug 2005
    Location
    Columbus, OH
    Posts
    1,328

    Default

    Thanks for the info everyone.

    Jason

  8. #8
    Plumber/Gasfitter dubldare's Avatar
    Join Date
    Sep 2005
    Location
    MN/ND
    Posts
    286
    Last edited by Terry; 10-18-2005 at 10:53 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •