jim.d
New Member
I own a Watts Premier recirculating pump kit for homes WITHOUT a plumbed return loop (the kind with the plastic temperature flow valve for the faucet furthest from the WH). The pump was installed at the WH's hot output line.
However, our new home has a plumbed loop.
My question is: can I install the Watts Premier pump in a return-loop system (sans faucet valve) at the end of the loop into the drain spigot? Is there any reason I can't move the pump from the WH out line to the return in the WH spigot? Flow/temperature incompatibilities?
Thanks, Jim
Watts:
https://www.wattspremier.com/products.php?product=Instant-Hot-Water-Recirculating-System
Gundfos
http://www.us.grundfos.com/Web/Download.nsf/Pages/D6774D5BEBD2117B8825652200650E2C/$File/Uprec-gd.pdf
However, our new home has a plumbed loop.
My question is: can I install the Watts Premier pump in a return-loop system (sans faucet valve) at the end of the loop into the drain spigot? Is there any reason I can't move the pump from the WH out line to the return in the WH spigot? Flow/temperature incompatibilities?
Thanks, Jim
Watts:
https://www.wattspremier.com/products.php?product=Instant-Hot-Water-Recirculating-System
Gundfos
http://www.us.grundfos.com/Web/Download.nsf/Pages/D6774D5BEBD2117B8825652200650E2C/$File/Uprec-gd.pdf