Amjad
New Member
I have been working on a standing shower done with ceramic tiles all around. I have used kerdi to waterproof the whole thing. I slightly miscalculated the drain height and now the tile around the drain is sitting about 1/8th of an inch lower then the drain. I did use extra thin sit mortar all around to try to bring it to a level but I still ended up being 1/8th short. If I just tile it this was ill have water staying around the drain.
I was thinking to use a little extra mortar underneath the 2 tiles which will be cut around the drain but the problem is that it'll become higher then the ones surrounding it and the problem wont be solved.
If anyone has experience with this please help me out. I'd really appreciate that.
Thanks!
I was thinking to use a little extra mortar underneath the 2 tiles which will be cut around the drain but the problem is that it'll become higher then the ones surrounding it and the problem wont be solved.
If anyone has experience with this please help me out. I'd really appreciate that.
Thanks!
Last edited by a moderator: