glaeser
richard
I have a problem with my well. the well pump is a pentex 10sp4co2j-04 pump.5 yrs old.A 30/50 pumptrol presure switch (new) and a wx205-well-x-trol presure tank.(20yrs0ld)
The problem is that the water flow stops completely for a second till the presure switch kicks in. 30lbs.
then i have water cause the pump is now working, i have the tank set at 28lbs.
It also takes about 2 minutes for the pressure to get to 50lbs.
I also changed pressure gauge then the pressure readings were 20/ 40
any ideas
The problem is that the water flow stops completely for a second till the presure switch kicks in. 30lbs.
then i have water cause the pump is now working, i have the tank set at 28lbs.
It also takes about 2 minutes for the pressure to get to 50lbs.
I also changed pressure gauge then the pressure readings were 20/ 40
any ideas