Ballvalve
General Engineering Contractor
I use an ammeter too. Just installed 2 new 4500w elements. [both operate together]
1 element; 17.8 amps on one wire, 19.9 on the other
1; 18.5 a on one side, 20 on the other.
Seems they should read the same on each wire. Never seem to. Whats up?
1 element; 17.8 amps on one wire, 19.9 on the other
1; 18.5 a on one side, 20 on the other.
Seems they should read the same on each wire. Never seem to. Whats up?